CNC Marine 5800 Half Cabin Plate Boat In good condition
Price: AU $69,000 |
Description:
Quality offshore plate boat designed by CNC Marine, professionally built and fitted out.
Rumarni was launched in November 2019 and is well set up for offshore work.
Features include live bait tank, Suzuki 140 hp 4 stroke outboard (55 hrs), hot water service, VHF radio, Garmin 9sv GPS plotter & sounder and Viper anchor winch with remotess from helm.
Galvanised steel Seatrial dual axle trailer.
The perfect all-round Offshore/Fishing boat in good condition.
October 2021 surveyor's condition report available on inspection
|
| Country: |
Queensland |
| Year: |
2019 |
| Designer: |
CNC Marine |
| Builder: |
Jack Walker |
| Length: |
5.50m - 18' 1" |
| Beam: |
2.2 m |
| Draft: |
. 6 m |
| Displacement: |
1.3 ton boat 1.8 ton with trailer |
| Hull Material: |
Plate Alloy 5 ml Hull, 4 ml Sides, 3 ml Cabin 5815 Grade |
| Deck Material: |
Plate alloy |
| Engine: |
140 hp 4 stroke 2019 |
| Engine Make/Model: |
Suzuki |
| Engine Hours: |
55 hours |
| Max Speed: |
~30 knots |
| Cruise Speed: |
22 knots |
| Fuel: |
150 l |
| Water: |
100 litres |
| Galley: |
Sink and tap |
| Hot Water System: |
Electric 5 m hose |
| Accommodation: |
Half cabin with v berth |
| Berths: |
V berth |
| Shower: |
Hot and cold shower at rear |
| Ground Tackle: |
60 m nylon and 6 m chain
Plough anchor
Viper reel winch with remote up and down at helm |
| Safety Gear: |
Life jackets, v sheet, flares, mirror and EPIRB in date |
| Bilge Pumps: |
Rule Bilge Pump |
| Fire Protection: |
Fire extinguisher |
| Electrics: |
2 x 12 volt Batteries
V sensitive relay
Changeover switch |
Electronics
Navigation: |
Suzuki Instrumentation
Garmin 9s Echomap SV Plotter and sounder |
| Trailer: |
Galvanised steel dual axle trailer |
| Remarks: |
Ideal boat for the Sandy Straits and offshore |
